Replacing the battery ignition key / remote control

1. Slide the release button (1) in the direction of the arrow and remove the emergency key (2) from the ignition.

2. Push the emergency key (1) into the slot, pulling the battery while the section (2) in the direction of the arrow from the ignition key.

3. Pull the battery 2 at the contact spring and remove it from the holder.

1. Insert the new battery in the holder so that the positive pole of both batteries when setting shows up. Batteries and section are marked ().

Do not touch the contact surfaces of the battery with your fingers.

2. Insert a section in the ignition key and lock.
3. Insert the emergency key into the ignition switch and lock.