 printable version
Removing and installing bonnet
Translation of the hood in a vertical position Translation of the hood in a vertical position
| - Pull the lever (1) to the left under the instrument panel, the hood release latch lock - bonnet slightly open for the length of the locking hook (2).
- Walk around the car in front, slightly lift the hood and by releasing the locking hook (2), lift the cover completely.
 | Previously, make sure the wiper blades are pressed against the windshield! |
- Using a screwdriver, pressing out the clip (3) separate gas-filled stop (4) from the bonnet ball head, then tilt the hood all the way back, after placing it on something soft.
|
|
Refitting Details of installation of the hood (1 of 2) Details of installation of the hood (2 of 2) Places lubrication components bonnet
| - Disconnect wiring (3) of the nozzle (4) feeding the windscreen washing liquid.
- Remove the nozzles (4) choke connectors (5).
- Remove the hose (6) and wiring harness (7) and release the bonnet of their grommets (8). Also remove the intermediate clips (9). Assess the sleeves and clamps, if necessary, prepare a removable components.
- Disconnect the ground bus (10).
- Ask the assistant to hold the hood, remove the mounting screws (11).
- Installation is in the reverse order. Do not forget to lubricate the hinges and a locking assembly.
- Make sure that the clearance fit Touring Car bonnet opening around the perimeter of the same, if necessary, remove the front grille (see. Section Removal and installation of the front grille) and adjust the position of the latch so that its operation took place with little resistance.
- Check the functioning of the windscreen.
|
|
|
