add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Golf 4
Home
 
Volkswagen
Golf 4
Instructions
eleven Controls, devices and equipment
Weekly checks and service in a way
Start from an external source (other car)
If the engine does not start and the starter does not work
If the engine does not start, even if the starter works normally
Replacement wheels
Towing
Check tightness of connections
Places of weekly checks
Check engine oil level
Checking the coolant level
Check wiper blades
Checking the washer fluid
Check brake fluid level
Check the electrical system
Checking the battery
Tyres and pressure check in tires
Vehicle identification
Maintenance
Engine
Cooling system
Fuel System
Exhaust system
Ventilation and heating system
Coupling
Transmission
Suspension brackets and power shafts
Steering
Wheels and tires
Brakes
Body
Electrical equipment and wiring
 


Hit Counter by Digits


print page printable version

Checking the battery



Cleanliness of the battery and, in particular, its upper surface is especially important, since it accumulates on the dirt layer easily forms conductive tracks which lead to self-discharge of the battery. Cleanliness is important not only for servicing the battery, but also for maintenance-free batteries, which, despite its name, is not completely unattended.

The battery is located on the left front side of the engine compartment.

PERFORMANCE ORDER
1. Check the tightness of the connection terminals of the battery (A), and the integrity of the insulation of the wires (B).
2. If there is corrosion of the terminals of the battery as a white fluffy raid Disconnect the battery and clean them with a small wire brush.
3. Using a small wire brush, clean the terminals on the wires connected to the battery. If necessary, wash terminals with a solution of baking soda and warm water. Be careful that the solution did not get into soda cans battery.
4. Check that the nut securing element battery tight. Do not overtighten the nuts, as the battery case may be damaged.
5. Before connecting the battery terminals with petroleum jelly grease plugs acid-free and anti-corrosion compound.
6. Periodically (1 time per quarter) check the state of charge of the battery, which measure the density of the electrolyte in the battery banks.




« previos page
Check the electrical system
next page »
Tyres and pressure check in tires

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.