1. Place the vehicle on level ground. |
2. Check the engine oil level before starting the engine, but not earlier than 5 minutes after switching off the engine. Fill in only the engine motor oil prescribed by the manufacturer. |
3. After the engine stops, wait 5 minutes for oil to drain into the oil pan. |
| 4. Handle the probe (A) to measure the oil level is painted in bright color. Remove the dipstick engine oil. If the oil is at the level of (a) - the oil must be topped up. It is quite possible that the oil level after topping the mark was in the area (b) - Oil can be topped up. It may happen that the oil level after topping up will be in the zone of mark (s) - Oil must not be topped up. |
| 5. Using a clean cloth, wipe the dipstick from oil residues. Insert the probe into the engine and repeatedly take it. |
| 6. Determine the engine oil level, which should be between MIN and MAX marks on the dipstick. The quantity of oil between the MIN and MAX is 1 liter. |
| 7. Remove the oil filler cap and fill with the required amount of oil into the engine. |