 printable version
Removal and installation of switches
A warning  When disconnecting the battery clears the memory cells, for example, a radio receiver code. Without the code, the radio can reconnect only to the manufacturer.
Before removing a switch remove a wire of weight from the battery and re-connect it to the battery only after the installation of the switch.
Lighting switch
| PERFORMANCE ORDER | | 1. Turn the rotary light switch to 0. |  | 2. Click on the light switch knob (arrow 1). In this position, rotate it in a clockwise direction (arrow 2) and remove the light switch of the instrument panel (arrow 3). | | 3. Disconnect the electrical connector from the switch. | | 4. Connect the light switch electrical connector. |  | 5. Insert the light switch in the instrument panel socket, then press it (arrow 1) and simultaneously rotate in a clockwise direction (arrow 2). If both hooks are omitted lock switch. | | 6. Press the knob lights (arrow 3) to fix a clear switch in the instrument panel. |
|
CORRECTION headlights / dimmer LIGHTING INSTRUMENT PANEL
| PERFORMANCE ORDER |
A warning To avoid scratching the instrument panel when removing the switch, tape the area around the switch.
|  | 1. Using a thin blade screwdriver, pry the switch housing and remove it from the dashboard. | | 2. When the switch press it into the instrument panel to clear lock. |
|
Power window switch
Window switches on the driver door formed as a unit. If you have a problem you need to replace the entire unit.
| PERFORMANCE ORDER | | The driver's door | | 1. Using a thin blade screwdriver, move the trim inside door handle to the door. | | 2. Remove the door handle with the control unit from the interior door trim. | | 3. Disconnect the electrical connector. |  | 4. Remove the three screws and remove the control unit. | | 5. Installation is made in sequence, return to removal. | | Door front passenger / rear doors | | 6. Remove the interior door trim. | | 7. Disconnect the electrical connector from the power window switch. |  | 8. Click on the side surface of the switch (A) and remove it from the slot in the housing (B) of the internal handle of opening of the door. | | 9. Insert the window switch until it clicks into the socket housing interior door handle. | | 10. The further installation is made in sequence, return to removal. |
|
Mirror Control Switch
| PERFORMANCE ORDER | | 1. Remove the door trim. | | 2. Disconnect the electrical connector from the switch. |  | 3. Lift out the side mounting of the switch (A) and remove it from the case. | | 4. Insert the switch into the housing and fix it. | | 5. The further installation is made in sequence, return to removal. |
|
SWITCH sunroof controls / interior lamps
Switch sunroof controls / interior lamps | 1 - diffuser;
2 - screws;
3 - switch housing;
4 - an electric socket;
5 - an electric socket;
6 - light;
7 - ceiling lamp;
A - direction of removal;
B - hooks |
| PERFORMANCE ORDER | | 1. Remove the lens. To do this, insert the blade of a knife or other similar object into the slot between the housing and the lens and gently pry the lens. | | 2. Remove the screws holding the switch. | | 3. Press the switch in the direction of the arrow (A) and remove it from the back of the hook (B). | | 4. Disconnect electric sockets and remove the switch. | | 5. Installation is made in sequence, return to removal. |
|
SWITCHES hazard warning lights, rear window defogger AND OTHER
| PERFORMANCE ORDER | | 1. Fixing of switches made by the same method. | | 2. To avoid scratching the instrument panel when removing the switch, tape the area around the switch. |  | 3. The edge of a thin screwdriver inserted under the switch, pull the switch out of the slot dashboard. |
A warning The switch consists of a switch housing and a switch to a functional symbol. The switch is latched in the switch housing. If acted only switch from the instrument panel, using a pliers, pull the switch housing of the instrument panel.
| | 4. Disconnect the electrical connector from the switch. | | 5. When the switch connect it to the electrical connector and secure it with a clamp. | | 6. Slide the switch in the dashboard slot until it locks. |
|
SWITCH CAPS LOCK fuel filler
| PERFORMANCE ORDER |  | 1. Insert the blade of a thin screwdriver or a knife in the switch housing, push and pull the switch in the center console. | | 2. Disconnect the electrical connector from the switch. | | 3. When the switch connect it to the electrical connector and secure the catch. | | 4. Insert the switch in the center console slot until it clicks into the lock. |
|
|
