1. Place the generator on the engine. |
2. Screw but do not tighten the central bolt of the generator. |
3. Turn the adjustment plate in its original position. |
4. Install the cover of the adjustment plate. |
5. Screw but do not tighten the bolt tensioning pads. |
6. Install the alternator drive belt on alternator pulley. |
7. Turn the adjusting screw to adjust the tension of the alternator drive belt.
Deflection alternator drive belt The new 8-9 mm Second hand 9-10 mm |
| 8. Tighten the bolt pad adjusting plate.
Torque: 19-26 N ??? m |
9. Tighten the central bolt and bolt adjusting plate.
Torque: 38-51 N ??? m |
10. Connect the generator connectors L and S. |
11. Connect a wire to the terminals of the generator. |
12. Secure the nut at terminal B. |
13. Close the terminal in the generator protective cap. |
14. Install the air inlet and fix its collar. |
15. Install the intake of fresh air. |
16. Replace the front bolts intake of fresh air. |
17. Connect the cable to the negative terminal of the battery. |