REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment
			Technical data
			Electrical circuits
			Circuit breakers
			Accumulator battery
			Check of level and density of electrolit and gymnastics
			Maintenance-free batteries
			Wires and terminals
			Charging standard batteries
			Starter
			The switch of blocking of a starter
			Removing and installing starter
			Repair of starter
			Check of the traction relay
			Check of brushes and brush holder
			Checking the stator coils
			Check rotor
			Generator
			Alternator drive belt
			Removing and installing the generator
			Repair the generator
			Check the rear window defogger
			Airbag
			The front passenger airbag
			Coiled Wire
			Troubleshooting System start-up and troubleshooting
			Electrical circuits

printable version

The front passenger airbag

A warning

Do not perform maintenance airbags or electrical components connected with the airbag.

Withdrawal

PERFORMANCE ORDER

	1. Remove the two screws at the corners of the base of the glove box and remove the glove box.
2. Remove the side cover and disconnect the electrical connector attached to the T-shaped bracket.
3. Remove the two front and two rear bolts.
	4. Disconnect the electrical connector from the air bag wiring harness.
A warning Airbag connected terminals orange and blue. Section socket "mum" consists of two separate parts, one for the airbags and one for audio. These parts are connected mechanically to connect to the blue section of the airbag connector and fixed two latches excluding their spontaneous disconnection. Section airbag connector also has fasteners that connect the two parts of the connector, after their separation. This feature eliminates the inadvertent deployment of the airbag. By separating the two sections of the connector, first and foremost necessary to disconnect the connector section orange. Connections must be performed in sequence, return to disengagement.
5. Remove the air bag from the instrument panel.

Setting

A warning

Be careful when installing the airbag not to pinch the wiring between the components of the instrument panel. Hinges and clamping the harness may cause disruption of the electric power supply circuit airbags.

PERFORMANCE ORDER

1. Connect the air bag to the vehicle harness.

2. Set the front passenger airbag.

3. Fix the airbag with four bolts, having tightened their demanded moment.

Torque: 8-12 N ??? m

4. Install the storage compartment and secure it with two screws.

5. Check the DTC airbag.

« previos page
Airbag

next page »
Coiled Wire