1. Remove the nut from the terminal M. |
| 2. Remove the stator leads from terminal M. |
| 3. Remove the two screws and remove the traction relay. |
| 4. Remove the spring plunger traction relay. |
| 5. Remove the plug from the lever, and remove the plug. |
| 6. Remove the back cover mounting studs. Remove the front cover from the starter motor. If present, remove the planetary gear motor. |
| 7. Remove the lever. |
| 8. The tubular mandrel knock latch lock ring. |
9. Remove the snap ring. |
| 10. Remove the retaining ring retainer and overrunning clutch. |
| 11. Remove the two screws and remove the back cover from the brush holder. |
12. Remove the rotor from the stator. |
13. Remove the washer from the rotor shaft. |