REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
			Technical data
			Bleeding the hydraulic system of a drive of brakes
			Checking the brake tubes and hoses
			Replacement brake hoses
			Installation height of the brake pedal
			Free running of the brake pedal
			The distance from the floor of the brake pedal
			Check the brake servo
			Parking brake
			Brake pedal
			The main brake cylinder
			Vacuum brake booster
			Replacing the front brake pads
			Replacing brake pads on the rear drum brakes
			Replacing brake pads on the rear disk brakes
			Parking brake
			Hydraulic control unit (HCU)
			The front wheel speed sensor
			Rear wheel speed sensor
			A gear rotor of the wheel speed sensor
			Repair of the working brake cylinder
			Main inspection
			Checking functionality
			The list of codes of malfunctions of brake system
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Replacement brake hoses

Withdrawal

PERFORMANCE ORDER

1. Special key OK130 430 019 turn away a connecting nut of a brake tube from the hose.
	2. Loosen the clamp and remove the brake hose from the bracket.

Setting

PERFORMANCE ORDER

1. Install the brake hose in an arm and fix its clip.
2. Connect the brake hose to brake tube and special key OK130 430 019 tighten the coupling nut.
A warning Make sure that the brake hose is not twisted. Make sure that the brake hose does not touch other parts of the car when turning the steering wheel from lock to lock or rocking of the car body. Torque: 13-22 N ??? m
	3. Repeatedly press the brake pedal and check for leaks from the brake hose and its connection to a brake tube.
	4. Check the brake fluid level, which should be between labels MAX and MIN located on a wall of transparent popolnitelnogo tank.
	5. Remove air from the hydraulic system of a drive of brakes.