add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)
general info. full specifications. diagnostics. hints. tips. tricks
 Kia Sephia / Shuma
Home
 
Kia
Sephia / Shuma
Maintenance
Engine
Greasing system
Cooling
The power supply system and release
Fuel system
Ignition system
Coupling
Manual transmission
Automatic Transmission
Axes and power shafts
Steering
Wheels and tires
Brakes
Technical data
Bleeding the hydraulic system of a drive of brakes
Checking the brake tubes and hoses
Replacement brake hoses
Installation height of the brake pedal
Free running of the brake pedal
The distance from the floor of the brake pedal
Check the brake servo
Parking brake
Brake pedal
The main brake cylinder
Vacuum brake booster
Replacing the front brake pads
Replacing brake pads on the rear drum brakes
Replacing brake pads on the rear disk brakes
Parking brake
Hydraulic control unit (HCU)
The front wheel speed sensor
Rear wheel speed sensor
A gear rotor of the wheel speed sensor
Repair of the working brake cylinder
Main inspection
Checking functionality
The list of codes of malfunctions of brake system
Suspension
Body
The air conditioning system
Electrical equipment
 


Hit Counter by Digits


print page printable version

The front wheel speed sensor



Withdrawal

PERFORMANCE ORDER
1. Disconnect the negative battery terminal.
2. After removing the trim, remove the wheel speed sensor and the connector in the engine compartment.

Check

PERFORMANCE ORDER
1. Measure the resistance of the wheel speed sensor.

Resistance: 1.0-1.3 ohms
2. If necessary, replace the wheel speed sensor.

Setting

PERFORMANCE ORDER
1. Install the wheel speed sensor and connect the connector.

Torque: 8-10 N ??? m
2. Place finish.
3. Connect the cable to the negative terminal of the battery.




« previos page
Hydraulic control unit (HCU)		 next page »
Rear wheel speed sensor

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.