 printable version
Air conditioning (if available)
Air conditioner | - Close the side vents of fresh air.
- Set the temperature control lever to the desired position.
- Start the engine, air conditioner and press the switch to set the desired fan speed.
- Adjust for maximum cooling capacity.
- Type A - Push the lever fully to the left temperature, set the lever to the fresh / circulating air in the position "
 "And set the fan speed to position 4. - Type B - Press fresh / circulating air, so that the indicator lights up, and set the fan speed to position 4.
|
|
C switch Air conditioner turns on and off by pressing the switch.  | Even if the air conditioner is not used for a long time, it shall be included for a few minutes once a week to lubricate the compressor parts. |
Type A  Type B   Instructions on operation of the air conditioner - If the vehicle has been left in direct sunlight, before turning on the air conditioner, open the window so that warm air can get out.
- When it rains, you can avoid misting, if you lower the temperature in the passenger compartment with air conditioner.
- When a slow train in heavy traffic capacity of the air conditioner is limited due to the idling of the engine.
- In this case, drive in low gear, to improve the power conditioner.
- Timely checking and maintenance, so that he was ready to go at any time.
|
