REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 323 (1985 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	323
		Introduction
		Gasoline engines
		Engine oil
		Engine cooling system
		Ignition system
		The power supply system, the carburettor, fuel injection system
		Diesel engine
			The principle of operation of the diesel engine
			Removing and installing toothed belt / adjusting timing gear
			System of preheat of the diesel engine
			Checking the system of preheat
			Removal of air from the power supply system
			Check / replacement of the electromagnetic valve fuel cut
			Adjustment of a drive gas
			Check / adjust the idle speed
			Removal and installation of atomizers
			Removal and installation of the vacuum pump
		Exhaust
		Coupling
		Manual gearbox
		Automatic Transmission
		Suspension and steering system
		Brakes
		Wheels and tires, a body, car coloring, care of the car
		Electrical system
		Heater, illumination system, devices
		Controls and operation receptions
		Electrical diagrams

printable version

Check / adjust the idle speed

Since diesel engines have no ignition system requires a special tachometer, working on the basis of solar cells. It is quite expensive, not necessarily buy it.

PERFORMANCE ORDER

Warm up the engine to operating temperature, engine oil temperature at least 80 ?� C.
Electricity consumers (radio, lighting) must be switched off.
Leave the engine idling, tightening the hand brake.
Check the idle speed, the desired value: 800-830 / min.

If the idle speed is adjusted incorrectly, loosen the lock nut and adjust the rotation of the adjusting screw. After the adjustment, lock the screw again.

If speed is not satisfactory, please contact the shop or service MAZDA BOSCH.

« previos page
Adjustment of a drive gas

next page »
Removal and installation of atomizers