 printable version
Backdoor
Withdrawal
| PERFORMANCE ORDER | | 1. Fully lower down the door glass. |  | 2. Open the front door and back door closed, unscrew the hinge pins (1). |  | 3. The protective sleeve (2) from the door pillar press plastic wrench (to disconnect the spring clips). | | 4. Stopper (4) tetrahedral shtekkernogo compounds suitable pull hook. | | 5. Open the rear door. |  | 6. Remove the gasket (6) of the door, remove the brake and screw (5). | | 7. Remove the hinges from the door up two people. Simultaneously disconnect shtekkernoe connection from door pillar, taking care not to damage the paint. |
|
Setting | PERFORMANCE ORDER | | 1. Insert the door hinges at the top, with plug connection and snap shtekkernoe stop (4) by pushing it. | | 2. Secure the spring terminals in the protective sleeve (2). | | 3. Screw the brake bolt of the door (5) to the door pillar to 25 Nm | | 4. Install the cover (6). | | 5. If necessary, adjust the door, then tighten the hinge screws (1) with a torque of 35 Nm |
|
|
