REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (from 1993 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	C-class
		Introduction
		Maintenance
		Engines
		Lubrication system
		Cooling
		Heating and ventilation
		Ignition system
		Fuel system
		Chassis
		Steering
		Brakes
		Body
			Introduction
			The front door
			Backdoor
			The handle of the front door
			Handle rear door
			Door lock
			The inner door trim
			Front windows
			Glass front window
			Rear windows
			Glass front door
			Engine window
			Glovebox
			The protective coating gear levers
			Front ashtray
			Average Console
			The panel of service of heating
			Lining A-pillar
			Lining the C-pillar
			Front seat
			Backseat
			central locking
			Outside mirror / mirror glass
			Coverage under the dashboard
			Front bumper
			Rear bumper
			The inner fender
			Fender
			Grille / Mercedes emblem
			Traction engine hood
			Coverage under the windshield
			The air supply apparatus for heating the passenger compartment
			Header
			Paintwork
			Corrosion of metal
			Avtomakiyazh
			What creaks?
			Luke
		Electrical

Front seat


1. Headrest 2. The driver's seat 3. Cover 4. Details of the seat belt	5, 6, 7. Bolts 8. Cover 12. The locking finger

Withdrawal

PERFORMANCE ORDER

1. Move the seat all the way forward.

2. Remove the shell part of the seat belt (4), the bolt (5), remove the belt from mountings.

3. Remove the 3 screws (6 and 7) of both tires rear seats with the help of a screw with an asterisk E12.

4. Fully slide the seat back.

5. Remove the front cover (8) on both sides, which lift up the tab with a screwdriver.

6. Remove the two screws on both tires front seats.

7. Disconnect the connector for the heated seat cushion frame of the seat in front.

8. Remove the seat.

Setting

PERFORMANCE ORDER

1. Install the seat. When the locking pin (12) is to enter into the opening rear console.

2. Put the connector seat heating.

3. Screw the bus seats front and rear torque of 50 Nm

4. Tighten the bolt in the belt fasteners to a torque of 35 Km.

5. Install the cover.

next page »
Backseat