REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (from 1993 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	C-class
		Introduction
		Maintenance
		Engines
		Lubrication system
		Cooling
		Heating and ventilation
		Ignition system
		Fuel system
		Chassis
		Steering
		Brakes
		Body
			Introduction
			The front door
			Backdoor
			The handle of the front door
			Handle rear door
			Door lock
			The inner door trim
			Front windows
			Glass front window
			Rear windows
			Glass front door
			Engine window
			Glovebox
			The protective coating gear levers
			Front ashtray
			Average Console
			The panel of service of heating
			Lining A-pillar
			Lining the C-pillar
			Front seat
			Backseat
			central locking
			Outside mirror / mirror glass
			Coverage under the dashboard
			Front bumper
			Rear bumper
			The inner fender
			Fender
			Grille / Mercedes emblem
			Traction engine hood
			Coverage under the windshield
			The air supply apparatus for heating the passenger compartment
			Header
			Paintwork
			Corrosion of metal
			Avtomakiyazh
			What creaks?
			Luke
		Electrical

printable version

Rear windows

1. Power windows
2. Slider
3. The mounting holes countersunk rivets
4. retainer
5. Bus Window
6. lowered glass
7. Blind rivet 4.8 mm

Withdrawal

PERFORMANCE ORDER

1. Remove the interior door trim.

2. Carefully remove the sealing tape.

A warning

The film is easily torn.

3. Remove the retaining clip from the bus window.

4. Retractable glass bus pull-down window of the slide and move up in the bus window. Fix the glass with a plastic or wooden wedge to keep it fell.

5. riveted of glass. Drill four rivets drill 4.8 mm. Make sure at the same time that the drill was not included in the inner plate of the door. For rivet requires special pliers for countersunk rivets.

6. Remove the bottom windows. Power windows removed together with the motor. Disconnect the power window.

Setting

PERFORMANCE ORDER

1. Insert the windows in the door and rivet tongs for countersunk rivets. If not available mites, windows can be fixed with screws and nuts. Before screwing the screws lubricated protective agent, for example, Loctite 270 or Omnifit.

2. Gently lower the glass and install the retaining clip.

3. Connect the electric wires.

4. Attach the sealing tape, making sure that there are no creases.

A warning

Do not damage the film - it must be perfectly sealed.

5. Install the inner door trim.

« previos page
Glass front window

next page »
Glass front door