printable version
Handle rear door
Handle rear door handle is similar in design to the front door, below indicates above all differences. Withdrawal PERFORMANCE ORDER | 1. Remove the door seal at the height of the door lock of the door groove. | | 2. Loosen 5 turns bolt with hexagon (arrow) socket wrench 3 mm through the hole in the door. Bolt with Hexagon socket accessible through a hole (10) on the front side of the door. | 3. Pull back the guide door back first, and then the outside. | 4. Pull the door handle to the back lining of the support bracket. The support bracket, if desired, can be removed from the inside of the door. To do this, however, it is necessary to remove the door trim. | 5. Remove the rubber gasket door handles. |
|
Setting PERFORMANCE ORDER | 1. Insert the doorknob with a lining and thus enter into the control lever door lock. | 2. Install the rear guide. | 3. Secure the door lock bolt with hexagon socket. | 4. Install the door seal and check door operation. |
|
|