1. Remove the cover under the windshield. |
2. Remove the wiper device. |
3. Unscrew the two rubber feet (5). |
4. Remove the 4 clips (7), unscrew a bolt (6). |
5. Remove the wire channel (10). |
6. Remove the clamp (12) fuel. |
7. Remove the 4 screws (13), press the 2 spring clips and remove the middle part of the partition (11). A warning When installing the middle of the partition to its original place to pay attention to the rubber tip to the supply hose heating.
|
8. Remove the support of the control unit (15), which remove the three screws (16). |
9. Remove the drip pan. A warning When you replace the header to monitor the correct position of the weir and drain hose.
|