REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (from 1993 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	C-class
		Introduction
		Maintenance
		Engines
		Lubrication system
		Cooling
		Heating and ventilation
		Ignition system
		Fuel system
		Chassis
		Steering
		Brakes
		Body
			Introduction
			The front door
			Backdoor
			The handle of the front door
			Handle rear door
			Door lock
			The inner door trim
			Front windows
			Glass front window
			Rear windows
			Glass front door
			Engine window
			Glovebox
			The protective coating gear levers
			Front ashtray
			Average Console
			The panel of service of heating
			Lining A-pillar
			Lining the C-pillar
			Front seat
			Backseat
			central locking
			Outside mirror / mirror glass
			Coverage under the dashboard
			Front bumper
			Rear bumper
			The inner fender
			Fender
			Grille / Mercedes emblem
			Traction engine hood
			Coverage under the windshield
			The air supply apparatus for heating the passenger compartment
			Header
			Paintwork
			Corrosion of metal
			Avtomakiyazh
			What creaks?
			Luke
		Electrical

printable version

Fender

Withdrawal

PERFORMANCE ORDER

1. Remove the front bumper.
2. Remove the indicator lamps.
3. Remove the inner wing.
	4. Remove the cover strips (moldings) or wring his hands wide plastic spatula.
	5. Open the door and remove the rear wing bolts of the car.
A warning This adhesive tape paste over the door to the work area to avoid damaging the paint.
6. Remove the bottom of the wing.
	7. Remove the top wing (five screws) and bottom in the bumper.
8. Remove the two screws in the recess of the direction indicators.
	9. Remove the bolts on the hood lights below and remove the hood.
10. Pull the wing forward and remove it.

Setting

PERFORMANCE ORDER

1. Cover the fender inside a sufficient amount of protective grease to the bottom.

2. Install and align the wing. The wing must be flush with the front door closed to or higher than a maximum of 1 cm. The gap between the wing and the engine bonnet closed, and the front door check.

3. Screw all bolts and gently tighten.

4. Recheck the position of the wing of the car.

5. can the cavity above the inner wing of the wax through the cutout direction indicators.

A warning

The hole in the wing top before applying the wax pasted with adhesive tape. After applying the tape to remove the wax.

6. Install the bumper.

7. Install the inner wing.

8. Install a flashing turn signal.

9. Attach the cover strips.

« previos page
The inner fender

next page »
Grille / Mercedes emblem