| 1. Before removing it, disconnect the negative battery terminal. |
| 2. If necessary, remove the air filter (see. Subsection 6.3.1.2), to improve access to the valve. |
| 3. Walk along the wires of the solenoid valve connector to connect and disconnect |
| 4. Remove the solenoid valve from the throttle body, remove the plunger and spring-loaded sealing washer. |
| 5. If the solenoid valve is replaced, it is necessary to get it out of the connector wire connection. |
| 6. If you do not want to disassemble the connector connection, the solenoid valve can be removed together with the fuel injector valve and an additional air supply. |
| 7. Installation is spent upside-down removals. |
| 8. Make sure the plunger and spring and have been correctly installed. |
