printable version
Brake cable - removal and installation
Front cable 1. Release the brake lever. 2. Disconnect the cable from the lever (photo). 3. If necessary, raise the rear of the auto-mobile and establish on supports. 4. Loosen the nut and disconnect the opposite end of the cable from the leveling arm (four-wheel drive and / m) or control (on rear-wheel drive and / m). 5. Disconnect the cable from the rear left front. 6. Remove the bolts equalizing lever. 7. Disconnect all hose clamps and remove the front rope and compensating lever. 8. Installation is performed in reverse order. Lubricate all friction parts.
| 18.2 Detail of a drive of a manual brake the car "Terrano I / Pathfinder" 1. Rear cable 2. Regulator 3. Front cable |
Rear cable 9. Release the brake lever. 10. Loosen the nut and disconnect the cable from the leveling arm (four-wheel drive and / m) or control (on rear-wheel drive and / m). 11. Disconnect the cable from the rear left front. 12. Disconnect the cable from the rear tips of the rear brakes and remove the lugs through the holes in the brake shield. 13. Loosen the clamps and remove the cables. 14. Installation is performed in reverse order. Lubricate all friction parts.
|