printable version
The line hydraulic drive - check and replacement
1. Check the condition of hoses and tubes every 6 months when detecting cracks, leaks, loss and other damage stey hose or replace the handset. 2. Pick up the new tube outside diameter not install the copper tubes. 3. The length of the new pipe should be chosen with a margin of 10 mm (including curves) for expansion under the nipple. Flaring and bending of tubes is recommended to perform in the service station.
| 13.3 bleed screw on the pressure regulator |
4. Install a new tube at least 19 mm away from moving parts.
|