 printable version
Hand brake - adjustment
1. Adjust the hand brake is necessary due to stretching the cable during operation or when disassembling the rear brake. 2. Turn on the handbrake, putting maximum effort. With proper adjustment of the wheels braked 5-10 clicks. Otherwise, the brake must be adjusted. 3. Lift the rear of the car and establish on supports. 4. Loosen the lock nut of the regulator (see photo).
| 16.4a Adjusting nut handbrake cable end.
|
5. Turn nut to establish normal course of rope. 6. Tighten the locknut. 7. Check the free rotation of the wheels when the brake is released and lower the car.
| 
