1. Place the generator on the bracket and secure it with screws. |
2. Check the condition of the V-ribbed belt and, if necessary, replace it. |
3. Install the V-ribbed belt and adjust its tension. |
4. Connect the wires to the generator. |
A warning The thick wire (B +) screw on the generator torque of 15 ?� 1 Nm. If the wire is not securely attached, you may experience the following problem: - Incomplete charging of the battery; - Not enough power to power consumers; - At the point of connection wires might spark; - In connection with the voltage spikes may lead to damage of electronic components.
|
5. Attach the blue wire (D +) to the generator torque 3,2 ?� 0,2 Nm. |
6. Connect the ground cable to the battery. |