Installing windows mechanisms

The installation of mechanisms windows in the front and rear doors are made as follows:

- Establish a mechanism at the door (through the top opening);

- Connect the plug connector;

- Tighten the windows by hand;

- Tighten the windows 8 N ?� m;

- Lower the window so that the latches were fixed on the guide window glass;

- Tighten the screws by half;

- Raise and lower the window a few times and secure fastening of glass with 4 bolts, tightening torque 8 Nm;

- Tighten the two screws with a torque of 8 Nm;

- Install noise insulation;

- Set the bracket.