printable version
Check the battery voltage
Check the battery voltage without load to determine the degree of charge. This test can be used instead of checking the density of the electrolyte. Before testing, make sure the battery is fully charged. PERFORMANCE ORDER | 1. Before measuring the battery voltage with no load disconnect it from the charger. On 15 Turn the lights, and wait 5 minutes to stabilize the battery voltage. | 2. Disconnect the battery. Negative wire must be disconnected first, and connect the last. | 3. The digital voltmeter, measure the voltage at the battery terminals. If the pressure shown by the digital voltmeter is 12.4 V or more, inspect voltage under load. |
|
|