|
printable version
Removing and installing clutch pedal
Details of installation of the clutch pedal
| - Remove the fastening clamp and the pusher finger.
- Disconnect the return spring.
- Give a fixing nut, remove the washer and remove the axle bolt.
- Remove the spacer and the two axial sleeve.
- Estimate degree of deterioration of axial sleeves and shoe covers, do not check whether the pedal arm is bent or weakened if the return spring. Replace defective components.
- Installation is the reverse order of disassembly of components - Axial and remote bush before boarding grease lithium grease (NGLI ?�� 2). Ensure compliance with the requirements of the specification of the Head Transmission Line to the efforts of a tightening of threaded fasteners.
- Finally, do not forget to adjust the pedal free play (see. Section Check and adjust the clutch pedal).
|
|
|
|