printable version
Adjusting drive heater
With 10/89 vol. Cable flap fresh / circulating air | | - To establish the lever of fresh / circulating air to fresh air.
|
- Attach the cable to pull the damper fresh / circulating air.
- Set the damper to the fresh air.
- Fasten the cable housing on the body of the flat bracket.
|
|
Cable drive for the air distribution flap | | - Set air distribution lever fully to the right (defrost).
|
- Prisoedinint rope to pull the air distribution valve.
- Set the damper to the defrost.
- Secure the cover of a cable and the bracket on the body.
|
|
Cable drive temperature control | - Set the mixer lever (temperature control) fully left to the "cold".
- Attach the cable to pull the mixing valve.
- Set the damper to the "cold".
| - Fix a cable cover in the bracket on the body.
|
|
|
From 9/85 on 9/89 MY. Cable flap fresh / circulating air | | - To establish the lever of fresh / circulating air to fresh air.
|
- Attach the cable to pull the damper fresh / circulating air.
- Set the damper to the fresh air, to drive this shift lever all the way forward.
- Fasten the cable housing on the body of the flat bracket.
|
|
Cable drive for the air distribution flap | - Set air distribution valve lever fully to the right (defrost).
| - Pull the lever all the way down and a loop to attach a cable to the lever.
|
| - Pull the connecting rod all the way down, and then install the connecting rod in the holder.
|
- Tighten the bar clamp.
- Turn on the fan and leave work for the 4th stage. Toggle button to switch on the control panel to all positions and check the distribution of air.
|
|
Cable drive temperature control | - Set the mixer lever (temperature control) fully left to the "cold".
| - Pull the lever down until it stops and attach a wire loop mixing valve to the arm.
|
| - Pull the lever connecting rod all the way up and set the connecting rod on the bracket.
|
- Tighten the bar clamp.
|
|
|