 printable version
Check the fan motor / predrezistorov
 | If the fan does not work only on one step, usually predrezistor defective. In this case, replace all predrezistory. |
Remove the glove box, see chap. Wheels and tires, a body, car coloring, care of the car, Section dashboard / center console. Fan Motor | - Disconnect from the fan motor.
 | - Post via cables auxiliary battery voltage (12V) and the terminals (+ / plus) and b (- / minus).
|
- The motor should earn, otherwise replace the motor.
|
|
Predrezistory | - Disconnect board resistors.
 | - Check for the following passage of current terminals with an ohmmeter: and - b; a - c; and - d. If at least one case is detected the absence of current flow predrezistory be replaced. The values of the individual resistors are in the range from 0.5 ohms to 1.5 ohms.
|
|
|
|
