|
printable version
Box of differential and distributing box: Check the oil level
On vehicles with all-wheel drive, check the oil level in a box of differential and transfer case. Spare parts need the following: - Gasket oil filler plug.
- Gear oil specification: a temperature above -18 ?� C: API GL - 5 SAE 90; the temperature below -18 ?� C: API GL - 5 SAE 80.
Check Transfer case | - Raise the vehicle in a horizontal position.
- If present, remove the shield of the engine and gearbox.
- Perform a visual check of tightness of the transfer case.
- Remove the oil filler bolt -B-.
- Insert your finger in the hole and check the oil level. The oil level should be at the height of the filler hole. If necessary, add oil through the opening.
- Install the oil filler screw with a new seal and tightened to 55 Nm.
- If there is, install shield engine and gearbox.
- Lower the vehicle.
|
|
Rear Differential | - Raise the vehicle in a horizontal position.
- Check the tightness of the rear axle.
| - Remove the oil filler plug -B-.
|
- Insert your finger in the hole and check the oil level. The oil level should be at the height of the filler hole. If necessary, add oil through the opening.
- Install the oil filler screw with a new seal and tightened to 55 Nm.
- Lower the vehicle.
|
|
|
|