 printable version
Manual transmission: oil Replacement
Spare parts need the following: - Seal the drain plug.
- Transmission oil according to the specification:
- Cars up to 9/89 MY .: temperature is above -18 ?� C: API GL - 4 or GL - 5 90 or SAE 80 W - 90, temperatures below -18 ?� C: ATF Dexron - II.
- Cars since 10/89 MY .: API GL - 4 or GL - 5 75 W - 90 or ATF Dexron - II (BP DOHC: Only ATF Dexron - II).
Replacement | - Raise the vehicle in a horizontal position.
- If present, remove the shield of the engine and gearbox.
- Visually check the tightness of the transmission.
- Remove the oil drain plug and drain the oil.
- Screw the oil drain plug with a new seal with a force of 55 Nm.
 | - Remove the oil filler cap on the front side of the gearbox.
|
- Fill the gearbox with gear oil specifications corresponding to the lower edge of the filler hole.
|
|
Total oil | Engine | Number l | | E1, EZ, E5 | 3 2 | | OT, B5, B6 before 9/89 MY. | 3 2 | | MY turbo 9/89. | 3, 35 | | four-wheel drive to 9/89 MY. | 3, 55 | | OT, B6, BP SOHC with 10/89 Vol. | 2, 68 | | BP DOHC | 3, 35 |
| - Install oil fill plug and tighten with a force of 55 Nm.
- If there is, install shield engine and gearbox.
- Lower the vehicle.
|
|
|
