add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 323 (1985 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 323
Home
 
Mazda
323
Introduction
eleven About this Guide
Cars of mark Mazda-323 - an introduction
The vehicle identification number
Acquisition of spare parts
Technology services, tools and workplace equipment
Starting the engine from the auxiliary power
Jacking and towing
Automotive chemicals, oils and greases
Troubleshooting
Current service
Maintenance work
Transmission / drive wheels
Visual check of tightness
Manual transmission: oil level check
Manual transmission: oil Replacement
Automatic transmission: Check oil level
Box of differential and distributing box: Check the oil level
Box of differential and distributing box: Oil change
Checking rubber cuffs of power shafts
Check the fluid level of the clutch
Check / adjust the clutch pedal
Brakes / tire / wheel
Steering / front wheel drive
Electric Car
Body / internal equipment
Gasoline engines
Engine oil
Engine cooling system
Ignition system
The power supply system, the carburettor, fuel injection system
Diesel engine
Exhaust
Coupling
Manual gearbox
Automatic Transmission
Suspension and steering system
Brakes
Wheels and tires, a body, car coloring, care of the car
Electrical system
Heater, illumination system, devices
Controls and operation receptions
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Check the fluid level of the clutch



Depending on the model and execution MAZDA 323 can have a separate fluid reservoir Clutch. The compensation tank is located in the engine compartment next to the brake booster. The cover has a vent hole, which must not be blocked. Compensation tank is made of transparent material so that the liquid level at any time can be monitored from outside. It is recommended to glimpse expansion tank every 4 weeks. If you want to add a liquid, use brake fluid SAE specification J 1703, or DOT 4.

PERFORMANCE ORDER

  1. Check that the fluid level is between the minimum and maximum mark. If the level has fallen below the minimum mark, check the hydraulic system for leaks and replace if necessary the appropriate item. If the system is pressurized, so worn clutch disc. See Section Removal and installation / check adhesion.




« previos page
Checking rubber cuffs of power shafts
next page »
Check / adjust the clutch pedal

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.