 printable version
Check idling
Engines BP have electronic idle speed control system, so the adjustment of the idle speed of the engine can not. Elements of system of injection  Driving fuel injection system of the engine 1, 4 liters (OT) 
| Test condition: The air filter should be installed; all hoses and pipes connected to the air intake system. All electrical consumers switched off. - Warm up the engine. Engine temperature is at least 80 ?� C.
- Check the ignition timing.
 | Connect test device only when the ignition is off. |
- Connect the tachometer according to the manufacturer's instructions.
- Start the engine and leave to idle.
- Run the engine for 2 minutes to work with a speed of 2500 / min.
- Leave the engine running at idle and check the idle speed.
| Engine | Idle speed | | OT | 850 ?� 50 / min 1 | | B6 (DOHC) | 1025 ?� 25 / min 1 | | B6 (DOHC) | 900 ?� 50 / min 1 |
1 - Automatic transmission: the idling speed to + 100 rev / min. | While checking the radiator fan should not be included. If the fan is on, wait until it goes off again. |
 | - If the idling speed is not correct value, adjust it with the adjusting screw throttle.
|
- Disable checking devices with the engine off and the ignition is off.
|
|
|
