add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (from 1993 to 2000, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Mercedes-Benz C-class
Home
 
Mercedes-Benz
C-class
Introduction
Maintenance
Engines
Lubrication system
Cooling
Heating and ventilation
Ignition system
Fuel system
Fuel System Description
PETROL INJECTION
The engine management system PMS and HFM
Self-diagnosis of the state of the system ignition and fuel injection
Air Mass Sensor
Coolant temperature sensor
The sensor of the intake air
The system vacuum line
Fuel distributor with valve injectors
Injection valve
Oxygen sensor (oxygen sensor)
Fault diagnosis system of petrol injection
What you should know the owner of the car with a fuel-injected engine
Turbo Doctor
The injection system of diesel engines and power
EXHAUST
Transmission
Manual and automatic gearbox
Chassis
Steering
Brakes
Body
Electrical
 


Hit Counter by Digits


print page printable version

Air Mass Sensor



Withdrawal

PERFORMANCE ORDER
1. Remove the mains plug (arrow) with the air flow meter (B2 / 5), after loosening the cap nut on the connector.
2. Loosen the clamp (4/7).
3. Loosen the clamp (4/13) and remove the air flow meter.
4. Check for damage and porosity of the O-ring (4/1), replace it if necessary.

Setting

PERFORMANCE ORDER
1. Set the air flow meter with O-ring.
2. Tighten the hose clamp and tighten the clamp.
3. Push the mains plug, screw the cap nut tight until then, until it snaps into place.




« previos page
Self-diagnosis of the state of the system ignition and fuel injection		 next page »
Coolant temperature sensor

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.