add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz E-Class

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz E-class
Home
 
Mercedes-Benz
E-class
Introduction
Description of the model Mercedes E-Class
Working conditions and tools
Car Care
Diesel engines
Petrol engines
Transmission
Chassis
The brake system
Electrical
Accumulator battery
Starter
Generator
Checking the level of electrolyte in the battery, service contacts.
Checking the battery charge
Start the engine from the external power supply
Charging the battery
Removing the battery
Detection of faulty consumer
Checking the voltage regulator
Removing the generator
Removing and installing starter
Lighting
Sound and light alarm
Control equipment
Device combination
Cruise control (cruise control)
The system of airbags and seat belt pretensioners
Wires and fuses
Cable colors
Mounting block relays and fuses
Circuit breakers
Electrical circuits
Shop
Body
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Charging the battery



The removed battery must be recharged once a month via the charger. Fully discharged batteries in the cold can freeze and burst, on the other hand, are cold-charged.

SEQUENCE OF WORK

Charging the battery is best carried out in a similar device
Fig. 9.10. Charging the battery is best carried out in a similar device


1. Klemm positive wire to the positive terminal of the battery, negative - to negative (Fig. 9.10).
2. The charging current should be first about 10% of the battery capacity (for example, about 8 A battery 74 Ah) and a decrease in the charging process.
3. When charging the battery of the distilled water evaporates. This produces bubbles of hydrogen and oxygen. They are discharged through the vent holes in the battery cover. When they are mixed explosive gas is formed.
4. For this reason, make sure that the place where the battery is charged, is well ventilated. This is particularly important when using a high charging current.

A WARNING
Sparks during donning and doffing the terminals of the charger could cause a gas explosion. Be sure to follow the precautions.

5. The battery is fully charged, if the density of the electrolyte in the two measurements taken with a break of one hour, does not change. After charging, check the electrolyte level in the battery. If necessary, add distilled water.




« previos page
Start the engine from the external power supply
next page »
Removing the battery

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.