add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz E-Class

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz E-class
Home
 
Mercedes-Benz
E-class
Introduction
Description of the model Mercedes E-Class
Working conditions and tools
Car Care
Diesel engines
Petrol engines
Transmission
Chassis
The brake system
Electrical
Accumulator battery
Starter
Generator
Checking the level of electrolyte in the battery, service contacts.
Checking the battery charge
Start the engine from the external power supply
Charging the battery
Removing the battery
Detection of faulty consumer
Checking the voltage regulator
Removing the generator
Removing and installing starter
Lighting
Sound and light alarm
Control equipment
Device combination
Cruise control (cruise control)
The system of airbags and seat belt pretensioners
Wires and fuses
Cable colors
Mounting block relays and fuses
Circuit breakers
Electrical circuits
Shop
Body
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Removing the battery



Before removing the battery, make sure that you have a fixed code radio theft protection. When removing the battery erased the memory of all electronic-storage devices of the car.

SEQUENCE OF WORK
1. On the sedan, remove the rear seat cushion on the wagon fold rear seat forward.

To remove the battery, first remove the wire from the negative terminal, then the positive
Fig. 9.11. To remove the battery, first remove the wire from the negative terminal, then the positive


2. Remove the wire from the negative terminal of the battery to work in the future has not happened short circuit (Fig. 9.11).
3. Remove the wire from the positive terminal of the battery.
4. Remove the vent pipe (if installed).
5. Remove the bolt and remove the bottom of the battery.
6. Remove the battery.
7. Subsequent installations follow a reliable fastening of the battery (shaking while driving can damage the lead battery electrodes).
8. First connect the positive terminal and then negative. Confuse the terminals for the impossible, because the poles of the battery contacts have different diameters.
9. Replace the ventilation tube (if provided).
10. Put on a special train terminals or petroleum jelly.
11. Enter the code for the radio.




« previos page
Charging the battery
next page »
Detection of faulty consumer

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.