1. Periodically check the fluid level in the system hydrostrengthening steering to avoid potential problems with the management of the car, such as damage to the steering pump. Proceed as follows.  | Do not hold the steering wheel all the way to the bottom or vice versa to one side or another for more than five seconds. It can damage the steering pump. |
2. Tank hydrostrengthening steering system is located in the engine compartment and has a screw cap with a built-in measuring probe it.
3. Park the vehicle on level ground, and cock a lay brake.
4. Engine 112: Remove the left air intake hose.  | 5. Turn left 1/4 turn cover (1) and remove the dipstick (2). |
6. If the oil level of the cold must be between the ?�MIN?� and ?�MAX?� (3/4) pointer. Cold oil is considered if the temperature is about 20 ?� C.
When warm oil (80 ?� C) the level must be between the ?�MIN?� and ?�MAX?� (5/6) pointer.
7 .If necessary, the liquid level in the tank should be supplemented. To complement levels, use only new fluid, as even the smallest contamination can cause a malfunction of the hydraulic system. | If the liquid level in the tank drops below the zone corresponding to the temperature of the fluid, steering with hydraulic power steering must be checked by a specialist workshop, since there is a loss of fluid. In this case, the only option is not sufficient to confine the liquid level. |
8. Replace the cover and tighten with a pointer.
9. Engine 112: Secure the left air intake hose.
10. With the engine running, turn the steering wheel several times from lock to lock. Thus the air is removed from the system. | 
