| 1. Lift the front of the car and establish on supports. |
| 2. Remove the wheel. |
| 3. Rasshplintuyte and release nut steering rod, press out the hinge of a tip, unscrew the nut. |
 | 4. Release the lock nut steering rod. |
 | 5. Remove the tip of the rod by counting the number of revolutions, or mark the original location of the tip rod (label specified by an arrow). |
| 6. Clean the thread rods and tip. |
| 7. Replace tip if damaged cover, finger in the hinge has a noticeable backlash, or a finger jammed in the joint, and if damaged thread tip. |
| 8. Wrap the tip on the counted number of turns. |
| 9. Clean the tapered portion of the tip of your finger to connect the knuckle. |
| 10. Tighten the nut with the set moment. |
| 11. Tighten the nut to align slots nuts with holes in the finger and zashplintuyte. |
| 12. Establish a wheel and lower the car. |
| 13. Check the front wheel and tighten the lock nut. |
