| 1. Lift the front of the car and establish on supports. |
| 2. Remove the pump drive belt. |
| 3. Remove the bolt ring fitting high pressure, disconnect the pump hose. |
| 4. Drain the liquid. |
| 5. Remove the return line fitting. |
| 6. Unscrew the bolts and remove an arm of the tensioner. |
| 7. Turn the pulley of the pump to one of the holes of the pulley is compatible with the coupling bolt. |
| 8. Remove the nut of a coupling bolt and washers. |
| 9. Remove the coupling bolt, hold the pump and remove the pump. |
| 10. On the part of the car need to turn away bolts and remove the pump bracket by pulling down. |
