| 1. To remove the hub lift the rear of the car and establish on supports. |
| 2. Remove the wheel. |
| 3. On cars with disc rear brakes, remove the disc and caliper without disconnecting the hose. |
| 4. On vehicles with rear drum brakes, remove the drum. |
 | 5. Remove the hub cap and rasshplintuyte axle nut. |
 | 6. Release the hub nut. |
 | 7. Remove the nut, remove the washer and hub. |
| 8. Clean the shaft and put a new wheel hub bearing. |
| 9. Slide the washer and screw the nut (washer and nut replace). |
| 10. On cars with drum brakes drum. |
| 11. On cars with disc brakes, set the disc and caliper. |
| 12. Tighten the nut with the set moment. |
| 13. Check up freedom of rotation of the hub nut zashplintuyte new cotter pin and press-fit cap. |
| 14. Establish a wheel and lower the car. |
