1. Disconnect the battery from weight. |
2. Set the wheels in driving position on a straight line. |
3. On 2 wheel spokes, remove the central cover, remove the panel audio signal by disconnecting the latch by a screwdriver inserted between the wheel and the panel. |
4. At the wheel in 3-spoke disconnect clamp screwdriver inserted into the recess of the lower spokes. |
5. Gently pry the center cover the bottom edge, remove the rest of the latch and remove the cover. |
6. 4-spoke wheel with release screws at the base of the hub and remove the cover. |
| 7. Disconnect the audio signal. |
8. Remove the screw bracket wire (in the vehicle). |
| 9. Mark the position of the wheel on the shaft (arrow mark indicated steering shaft). |
10. Remove the nut. |
| 11. Remove the wheel from the shaft splines, turning to the side and pulling over, or a stripper. |