add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Nissan Sunny
Home
 
Nissan
Sunny
Instructions
Maintenance
Engines
Cooling
Heating and ventilation system
Fuel and exhaust system
The system of the engine is started
Coupling
Transmissions
Axles
Brakes
Suspension and steering
Technical data
Front hub bearing
Strut front suspension
The lower arm
Ball joint lower arm
Stabilizer bar front suspension
Bearings rear wheels
Parts rear suspension
Steering wheel
The ignition switch and the lock of blocking of a steering column
Steering column
Steering gear
Covers Steering gear
Hydraulic
Power-steering pump
Ball Joint
Body
Electrical
 


Hit Counter by Digits


print page printable version

Technical data



Front suspension

Type
Independent, lever, with two columns and stabilizer bar

Rear suspension

Type
Independent, lever, with longitudinal bars and two columns on the part of the vehicle is provided stabilizer bar
Bearing Kit:
- Bearing play
not more than 0.05 mm

Steering

Type
Lath for car parts provided power
Luft wheel (on the rim)
not more than 35.0 mm
The length of the steering column
536.2 - 537.8 mm

Torque (Nm)

Front suspension
Axle nut
250
Bolts and nuts to the rack pin *
120
Upper strut shock absorber rod nut
70
Nuts of fastening of a rack to a body
27
Nut of the lower arm to the bracket body
115
Bolts clamp the lower arm
85
The nut of the ball joint of the lower arm
65
Nuts of fastening of draft anti-roll bar to the lower arm *
20
Nuts of fastening of the thrust to the crossbar stabilizer bar *
50
Clamp bolt stabilizer bar
35
Nut steering rod to pitman arm:
- Recommended time
39
- Limit
49
Rear suspension
Nut Kit
230
Upper strut shock absorber rod nut
65
Nuts of fastening of a rack to a body *
27
Bolts and nuts to the rack pin *
120
Nuts suspension arms *
110
Nut rod to the bracket body *
110
Nut bar to the back pin *
110
Nuts of fastening of draft of the stabilizer to the cross *
50
Nuts of fastening of draft of the stabilizer to the bar *
25
Bolts stabilizer bracket
35
Steering
Nut steering wheel
35
Nuts and bolts of the steering column
17
Bolts clamp universal joint column
85
Locknut tie rod
40
Nut tie rod to pitman arm
39 - 49
Bolts steering pump to the bracket
thirty
Choke tubes hydraulic drive on the housing of the steering mechanism
22
The ring tube fitting on the hydraulic drive pump
55
Wheel nuts
110

* To be replaced at each disassembly.




« previos page
Suspension and steering
next page »
Front hub bearing

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.