| 1. Clean the barrel with dust and dirt by wiping with a cloth moistened with alcohol. |
| 2. Remove the covers. |
| 3. Coat the cylinder identification tags. |
| 4. Remove the piston and spring. |
| 5. All of the cylinder seals must be replaced. |
| 6. Check the condition of the piston and the cylinder bore. |
| 7. In the presence of defects in these parts, replace the cylinder assembly. |
| 8. Prior to assembly, thoroughly clean all parts, pistons, spring and cuffs lubricate the brake fluid. |
| 9. Put the cuffs on the Pistons. |
| 10. Carefully insert the plunger into the barrel first, guided by the labels put at dismantling. |
| 11. Install the spring and the second piston. |
| 12. Put the covers on the cylinder, brushing their edge brake fluid. |
