 printable version
The brake booster and check valve
Power brakes with integrated valves
The valve is inserted into the front of the amplifier.
Withdrawal
| PERFORMANCE ORDER | | 1. Loosen the clamp and disconnect the hose from the valve. | | 2. Remove the valve from the rubber seal, turning in different directions and feeding on themselves. | | 3. Remove the seal. |
|
Check
| PERFORMANCE ORDER | | 1. Check the condition of the valve, the valve must be blown in one direction. | | 2. If necessary, replace the valve. | | 3. If it is damaged, replace the gasket. |
|
Setting
| PERFORMANCE ORDER | | 1. Set the seal into the housing of the amplifier. | | 2. Carefully insert the valve without damaging the case. | | 3. Attach the hose. | | 4. Start the engine and make sure no leak check valve. |
|
Amplifier with remote VALVE
The valve is mounted in the vacuum line and is fixed to the bracket body.
Withdrawal
| PERFORMANCE ORDER | | 1. Remove the valve from the bracket. | | 2. The arrow on the valve must be directed towards the hose attached to the intake manifold. | | 3. Loosen the clamp and disconnect the hose from the valve. |
|
Check
Cm.
Setting
| PERFORMANCE ORDER | | 1. The valve is installed in reverse order. | | 2. Start the engine and check for leaks in the hose connection and valve. |
|
|
