add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Golf 4
Home
 
Volkswagen
Golf 4
Instructions
Engine
Cooling system
Fuel System
Exhaust system
Ventilation and heating system
Coupling
Transmission
Suspension brackets and power shafts
Steering
Wheels and tires
Brakes
Body
Care body
Care of an upholstery and rugs
Repair of insignificant damages of a body
Repair of strong damages of a body
The front body panel
Removing and installing front bumper
Removing and installing rear bumper
Removal and installation of a forward wing
Removal and installation of facing of a niche of a forward wing
Removal and installation of facing of a niche of the rear wing
Hood
Hood lock
Removing and installing radiator grille
Removal and installation of a lateral overlay of a body
Door
Luke
Purification gutter
Mirrors
The center console
Removal and installation of the top furnish in space for feet of the driver
Removal and installation of the glove compartment
Removal and installation of a lateral covering of space for feet
Removal and installation of overlays of thresholds
Removal and installation of the bottom facing of the central rack
Removal and installation of the right lateral covering of a luggage space
Removing and installing luggage compartment floor coverings
Removal and installation of back furnish of a luggage space
Removing and installing front seat
Side airbags
Removing the rear bench seat cushion
Removing and installing rear seat backrest
Washers and wipers
Electrical equipment and wiring
 


Hit Counter by Digits


print page printable version

Removal and installation of overlays of thresholds



Fasteners sill

6 - sill;
7 - push button;
8 - a spring clip attachment;
9 - clamps 5 pcs .;
10 - pad;
11 - an internal door seal;
12 - facing the front of the rack;
13 - B-pillar;
14 - carpet

Fasteners pillar trim

1 - upholstery;

2 - push-button;

3 - a clip;

4 - the flange of the body;

5 - the adjusting screw

Withdrawal

PERFORMANCE ORDER
1. Remove the rear seat cushion and the backrest rear seat forward.
2. Remove the lower A-pillar trim.
3. Remove the lower B-pillar trim.
4. Remove the push button, closing access to the set screw (5) (see. Fig. Elements of fastening of an upholstery of a back rack).
5. Separate the rear door trim (1) of the flange body (4), wherein the release clips (3).
6. Release clamps and separate the sill of the central rack.
7. Pull up to release the remaining clamps that secure the sill to the car body, and remove the sill of the car.
A warning

Clamps packing (10) are outside the belt.



Setting

PERFORMANCE ORDER
1. Before installation, check the condition of the clips sill and, if necessary, replace them.
2. Installation is made in sequence, return to removal.
3. Check the location of the door seal.




« previos page
Removal and installation of a lateral covering of space for feet
next page »
Removal and installation of the bottom facing of the central rack

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.