add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Golf 4
Home
 
Volkswagen
Golf 4
Instructions
Engine
Cooling system
Fuel System
Exhaust system
Ventilation and heating system
Coupling
Transmission
Suspension brackets and power shafts
Steering
Wheels and tires
Brakes
Body
Care body
Care of an upholstery and rugs
Repair of insignificant damages of a body
Repair of strong damages of a body
The front body panel
Removing and installing front bumper
Removing and installing rear bumper
Removal and installation of a forward wing
Removal and installation of facing of a niche of a forward wing
Removal and installation of facing of a niche of the rear wing
Hood
Hood lock
Removing and installing radiator grille
Removal and installation of a lateral overlay of a body
Door
Luke
Purification gutter
Mirrors
The center console
Removal and installation of the top furnish in space for feet of the driver
Removal and installation of the glove compartment
Removal and installation of a lateral covering of space for feet
Removal and installation of overlays of thresholds
Removal and installation of the bottom facing of the central rack
Removal and installation of the right lateral covering of a luggage space
Removing and installing luggage compartment floor coverings
Removal and installation of back furnish of a luggage space
Removing and installing front seat
Side airbags
Removing the rear bench seat cushion
Removing and installing rear seat backrest
Washers and wipers
Replacement of rubber tapes of brushes of screen wipers
Adjusting windscreen washer nozzles
Removal and installation of windshield washer nozzles
Removing and installing rear window washer nozzles
Removing and installing wiper arms
Removing and installing windscreen wiper motor
Removal and installation of tanks and washer pump
Removing and installing rear window wiper motor
Electrical equipment and wiring
 


Hit Counter by Digits


print page printable version

Washers and wipers



Regularly check the efficiency of the wiper blades. Friction brushes on the icy surface of the glass causes damage to rubber bands wiper. Dirty wiper blades with a soft cloth and a special tool.

You need to replace brushes, whose rubber band hardened, cracked or covered with silicone.

Withdrawal

PERFORMANCE ORDER
1. Raise the wiper blade from the windshield. Turn the wiper blade at 90 ?� to the wiper arm.
2. Push the wiper blade holder (arrow A), then move the brush on the lever (arrow B) and moving it in the opposite direction, remove the wiper arm.
3. Squeeze the two sides of steel amplifiers wiper rubber band and pull the rubber band from the end of the wiper brushes.

Setting

PERFORMANCE ORDER
1. Insert a new rubber tape without steel amplifiers into the lower clips of the wiper blade.
2. Insert steel amplifiers in the first groove of the rubber belt.
3. Pliers compress steel amplifiers together with a rubber band and put them in the top clamp of the wiper blade. This clip antennae must be logged in catches on the rubber band (arrow shows the latch recess).
4. Replace the wiper blades on the levers in the reverse order of removal. This latch must clearly indicate the brush on the screen wiper lever.
5. Lower the wiper arm on the windscreen.




« previos page
Removing and installing rear seat backrest
next page »
Replacement of rubber tapes of brushes of screen wipers

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.