printable version
Removing and installing front seat
Fasteners Front seat
1 - cap; 2 - the screw; 3 - inner rail seat; 4 - cap; 5 - the screw; 6 - external seat rails; | A, B - the sequence of removing decorative trim on the inside of the guide seat; C, D - sequence of removal of a decorative overlay of the outer rail seat; 7 - seat bolts, 23 Nm |
Location of electrical connectors in the front seat with airbag
| 1 - an electric socket airbags;
2 - the holder of the electrical connector;
3 - an electric socket seat heating;
4 - an electric socket adapter VAG-5094;
5 - socket electrical connector in the front seat |
Withdrawal
PERFORMANCE ORDER | 1. To remove the front seat must use a special adapter VAG-5094 for airbags. | 2. Turn off the ignition and remove a wire of weight from the accumulator. | 3. Move the front seat all the way forward. Remove the cap and unscrew the screw of fastening of a decorative overlay internal directing sitting. | 4. Remove the inner rail trim front seats, which lift up the back of the pad (arrow A) and moving back pad (arrow B), remove it from the guide (see. Fig. Elements of fastening of the front seat). | 5. Remove the cap and unscrew the screw fixing exterior trim seat rails. | 6. Remove the trim from the outer rail of the front seats, which lift the front of the pad (arrow C) and moving it back (arrow D), remove it from the guide. | 7. Move the front seat all the way back. | 8. Remove the screws (7) securing the front seat. Moving back, release the front seat of the guide and remove it from the car. |
|
A warning Before disconnecting the electrical connector system airbag front seat, remove the body of static electricity, which briefly touch hands to the body.
Disconnect the electrical connector side airbag (1) from the base of the connector (2) (see. Fig. Arrangement of electric sockets in the front seat with the airbag).
If you have a disconnect an electric socket (3) heating the front seats.
Connect the electrical connector (4) VAG-5094 adapter to the electrical connector (5).
Electric plug adapter VAG-5094 must be connected to the terminal all the time to remove the front seat.
Setting
PERFORMANCE ORDER | 1. Installation is made in sequence, return to removal. | 2. Tighten the front seat 25 Nm. | 3. Connect the ground cable to the battery. | 4. If the warning light after installing airbags front seat lights, that indicates the presence of a fault, it is necessary to address in a specialized workshop for a call from the memory unit recorded in her fault. |
|
|