add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Golf 4
Home
 
Volkswagen
Golf 4
Instructions
Engine
Cooling system
Fuel System
Exhaust system
Ventilation and heating system
Coupling
Transmission
Suspension brackets and power shafts
Steering
Wheels and tires
Brakes
Body
Care body
Care of an upholstery and rugs
Repair of insignificant damages of a body
Repair of strong damages of a body
The front body panel
Removing and installing front bumper
Removing and installing rear bumper
Removal and installation of a forward wing
Removal and installation of facing of a niche of a forward wing
Removal and installation of facing of a niche of the rear wing
Hood
Hood lock
Removing and installing radiator grille
Removal and installation of a lateral overlay of a body
Door
Luke
Purification gutter
Mirrors
The center console
Removal and installation of the top furnish in space for feet of the driver
Removal and installation of the glove compartment
Removal and installation of a lateral covering of space for feet
Removal and installation of overlays of thresholds
Removal and installation of the bottom facing of the central rack
Removal and installation of the right lateral covering of a luggage space
Removing and installing luggage compartment floor coverings
Removal and installation of back furnish of a luggage space
Removing and installing front seat
Side airbags
Removing the rear bench seat cushion
Removing and installing rear seat backrest
Washers and wipers
Electrical equipment and wiring
 


Hit Counter by Digits


print page printable version

Removing and installing front bumper



Front bumper

1 - the front bumper;
2 - a bolt 4 pcs., 20 Nm;
3 - bumper beam;
4 - nut 6 pcs .;
5 - a bolt of 6 pcs., 2 Nm;
6 - guide;
7 - a bolt 6 pcs .;
8 - a bolt 8 pcs .;
9 - bracket with nut 8 pcs .;
10 - a bolt of 7 pcs .;
11 - Suspension pad;
12 - spoiler;
13 - ventilation grates

Withdrawal

PERFORMANCE ORDER
1. Reject the safety bracket (B) upwards. Using a screwdriver blade (C) Lift the release lever (A) and remove it from the bonnet.
2. Remove the release lever (A) to the front cross member.
3. Remove the radiator grille.
4. Remove the radiator grille.
5. Remove the bumper bolts (8 and 10 cm. Fig. Front bumper).
6. Pull forward and remove the front bumper to the side guide rails.

Setting

Installation is made in sequence, return to removal.





« previos page
The front body panel
next page »
Removing and installing rear bumper

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.