1. Adjust the reference position of the hatch must be carried out if the drive mechanism of the hatch does not stop at the home position, or if the door is opened manually. To adjust the drive mechanism is necessary to remove the hatch. |
2. Remove a wire of weight from the accumulator. |
3. Connect the electrical connector to the motor drive mechanism hatch. |
4. Press the switch preset, which will result in the closure of the hatch is turned on. |
5. Pull switch preset, which will result in the closure of the hatch is turned on. |
6. Turn the switch is preset to the "door is open". |
7. Turn the switch is preset to the "door is closed". As a result, the engine is automatically set to the starting position and switch off. |
8. In this position, set the motor drive mechanism hatch. In addition, disconnect the electrical connector from the engine and remove a wire of weight from the accumulator. |