 printable version
Removing and installing handle of opening the bonnet
Withdrawal
| PERFORMANCE ORDER |  | 1. Pull about 2 cm handle opening the bonnet (A - hood release handle, B - the spring clip C - facing). | | 2. Place the edge of a thin screwdriver into the gap between the lever opening the bonnet and spring clip (B). | | 3. Release the hood release handle, with spring clip comes off the handle. |
A warning  The spring clip when removing falls over the side trim in deepening for feet of the driver.
| | 4. Release the side trim of the spring clips, first at the bottom corner of the front of the rack, and then the spring clip at the top. |
|
Setting
| PERFORMANCE ORDER | | 1. Secure the spring clips lateral furnish in deepening for feet of the driver. | | 2. First attach trim at the bottom of the front pillar, and then the upper portion of the side trim to the bracket. | | 3. Install the spring clip on the hood release lever. | | 4. Install the hood release lever on the bracket. |
A warning Before closing the hood, check operation of the lever opening the bonnet and bonnet opening cable.
|
|
|
