printable version
Replacement of support of the power unit
Removal and installation of a forward support of the engine in the following order: - Disconnect the negative terminal of the battery; - Establish a jack under the engine and through the wooden bar lift jack the engine so that the engine weight was perceived by a jack;
| Fig. 3.72. Mounting the engine mounts: 1, 3, 4, 5, 7, 9 - bolts; 2 - Front Bearing; 6 - Rear left support; 8 - rear right support
|
- Remove the bolt 3 (Fig. 3.72) a forward support of the engine 2; - Remove the starter; - Unscrew 4 screws that secure the front leg 2 to the power unit and remove the bracket; - Remove the mounting bolt 5 engine mounts to the front frame; - Remove the front engine support; - Installation remove components made in sequence, return to removal.
A WARNING Make sure to reference projection is aligned with the notch in the engine mount. |
Tighten all mounting bolts to torque the powertrain in accordance with the specifications. Removing and installing the rear right engine mount in the following order: - Disconnect the negative terminal of the battery; - Secure the lifting slings drive mechanism (winch) and raise so that the engine weight was perceived lifting mechanism; - Turn out a coupling bolt 9 (see. Fig. 3.72), the right back support of the engine 8; - Unscrew the screws 1 bracket right rear engine mount to the engine block; - Unscrew the rear right engine mount to the body and remove the support from the engine compartment; - Installation remove components made in sequence, return to removal; - Tighten all screws on the rear right engine mount torque in accordance with the technical requirements. Removing and installing rear left engine support in the following order: - Disconnect the negative terminal of the battery; - Establish a jack under the engine and through the wooden bar lift jack the engine so that the engine weight was perceived by a jack; - Remove the bolt securing the support 7 6 engine; - Remove the bolt back of the left support of the engine to the gearbox. - Remove the bolts fastening the motor mount to the body and remove the support from the engine compartment; - Installation remove components made in sequence, return to removal.
|